GEAR-PITCH
TYPE AUTO TAPPING MACHINE |
JT-4504 |
| GEAR-PITCH
TYPE AUTO TAPPING MACHINE |
 FEATURE |
| * |
Output
arbor is in straight joint which could reduce tolerance accumulated;
and in line with ER collet to avoid the deviation of running.
It is quite ideal for fine thread. |
| * |
Motor is
particular designed to run in clockwise & counter clockwise
rotation, low inertia could prevent the tapping from damage. |
|
 |
| Vertical
type JT-4504 Weight(about
120kg) |
Main
spindle
max. stroke
(mm) |
Type
of the
front side of
Main spindle
(mm) |
Diameter
of
thread (mm) |
Up
and Down moving
distance of the head
(mm) |
Distance
between
the main spindle
and the table
(mm) |
Working
table
size(mm) |
| 45 |
JT-1 |
 4
Less than |
260 |
350 |
225X230 |
| Motor |
Main
spindle speed
(R.P.M.) |
Auto
feeding thread
pitch for which
suits machine |
Max.
capacity of
Multi-spindle |
Packing
dimension
(cm) |
G.Weight
(kg) |
| 50HZ |
60HZ |
3PH
4P
0.18KW
(1/4HP) |
1340
760
420 |
1600
900
500 |
100,80
64,56, 48
44,40 |
0.175,0.2,
0.25,0.3,0.35,
0.4,0.45,
0.5,
0.6,0.7,0.75 |
2X8
spindles
2.6X4 spindles
3X2 spindles |
79
X 58 X82
(L)X(W)X(H) |
145 |
|
JT-4508A |
HORIZONTAL
& GEAR-PITCH TYPE
AUTO TAPPING MACHINE |
| FEATURE |
| * |
It
can adopt a professional machine assembled with horizontal type
while the vertical type is unable to suit for tapping condition. |
|
 |
| Horizontal
type JT-4508A Weight(about
50kg) |
Main
spindle
max. stroke
(mm) |
Type
of the
front side of
Main spindle
(mm) |
Diameter
of
thread (mm) |
Up
and Down moving
distance of the head
(mm) |
Distance
between
the main spindle
and the table
(mm) |
Working
table
size(mm) |
| 45 |
JT-2
CT-12 |
2~8
Less than |
260 |
350 |
225X230 |
| Motor |
Main
spindle speed
(R.P.M.) |
Auto
feeding thread
pitch for which
suits machine |
Max.
capacity of
Multi-spindle |
Packing
dimension
(cm) |
G.Weight
(kg) |
| 50HZ |
60HZ |
3PH
4P
0.37KW
(1/2HP) |
1340
760
420 |
1600
900
500 |
64,56,48,
44,40,32,
28,24,20,
18,16 |
0.2,0.25,0.3
0.35,0.4,0.45
0.5,0.6,0.7
0.75,0.8,0.9
1.0,1.25
(1.75) |
3X10
spindles
4X5 spindles
5X2 spindles |
79
X 58 X 79
(L)X(W)X(H) |
145 |
|
|
 |
JT-4508E |
AUTO
SLANTING TYPE A FULLY AUTO.
FEEDING CONTINUOUS GEAR-PITCH TAPPING MACHINE |
| FEATURES: |
| * |
It can be used to tapping threads whether has metal chips or not. |
| * |
It's a mechanical movement ,the machine is a fully auto.feeding continuous tapping,one user will permit to operate several machines at same time. |
| * |
Gear-pitch type auto.tapping will get a precise & accurate thread for finished pieces. |
| * |
It taps an accurate depth & will suit to the blind hole tapping |
| * |
It equipped with a safe device to monitor the feeding ,torque,radial & clamping. It ensures to keeping of pro-long tapping life & a safe job. |
| * |
It governed by PLC control (optional). |
| * |
It can easily quick -change of different tool sizes. |
| * |
Provision of BLANK Auto-Checking and Auto-Stop if abnormal. |
|
 |
 |
Madel E-Serles |
JT-4508E |
JT-6516E |
| Max.& Min. Theread's Diameter of Tapping |
2~8 |
5~16 |
| Max.& Min. Length of Tapping |
1~40 |
2~50 |
| Max.& Min. Across Corner or Diameter |
4~15 |
6~30 |
| Main Motor (HP) |
3/4HP |
2HP |
| Cooling Oil Pump |
1/8HP |
1/6HP |
| Cooling Oil Tank's Capacity (Liter) |
30L |
30L |
| Clamp Working-Pieces'Power |
Pneumatic |
Hydraulic |
| Net Weight (kgs) |
500kgs |
700kgs |
| Length x Width x Height(mm) |
1500x1100x2000 |
1700x1200x2150 |
|
 |
|
JT-4508D |
AUTO
TAPPING MACHINE WITH
INDEXING DISK |
| FEATURE |
| * |
This
machine with standard specification is available for mass production. |
| * |
Can
be divided into 4,6,8,12,24. |
| * |
Equipped
with auto recycle system for cutting oil. |
| * |
Can
be installed the extra mold on the disk surface depending on
the need of each work piece. |
|
 |
|
0.01mm,
exchangeable and can be exchanged without oil rapidly and stably.
