GEAR-PITCH TYPE AUTO TAPPING MACHINE
|
FEATURE |
| * |
Gear type |
| |
Equipped with replaceable AB gears and meet the tap of process thread with the pitch, the comparison between gear type and leading screw type is as follows: |
| |
| 1. |
Fine thread will be to limited tapping. |
| 2. |
Not easy to replace |
| 3. |
Unable to high speed running, tapping capacity will be to limited. |
| 4. |
Leading screw type is easy to wear and tear promptly due to long-term wear that could cause quality problems, such as bad tapping jobs . etc. |
|
| * |
Gear pitch auto tapping machine |
| |
It is designed to have one pitch by per turn, to feed and return back the knife synchronously and mechanically. Therefore, it is even though the soft plastic work piece, that could be tapped perfectly. It can make use of selecting push button or pedal switch to operate single up and down stroke, or use knob to operate round stroke. |
| * |
Convenience to operate |
| |
| 1. |
The work piece won't jump & pull-up when tapping due to one pitch by one turn. Just only to prevent work piece being rotated, it will simplified fixture, it is not necessary to hold down or clamp |
| 2. |
Equipped particularly with 2 clutches that make the main shaft return automatically to protect the tap while is tapping but not in alignment with hole or torsion exceeded. |
| 3. |
Even if operated by a beginner or a novice of the end of users, the quality and efficiency will not be affected. |
| 4. |
Easy to adjust the tapping stroke on the index disk. |
| 5. |
Available for all modes to equip with extra multi-spindle device to make it efficiently. |
|
JT-4508 |
| GEAR-PITCH TYPE AUTO TAPPING MACHINE |
|
FEATURE |
| * |
Installed an isolated cooling fan in the interior of motor to dissipate dissipate heat. Could be operated continuously, steady and durable. |
| * |
Vertical column is solid and treated by tempering to get rid of stress, surface is chrome plated, wear resisting and no rust. |
| * |
High speed rotation continuously, 42 times/per Minute. |
|
 |
| Vertical type JT-4508Weight(about 120kg) |
Main spindle
max. stroke
(mm) |
Type of the
front side of
Main spindle
(mm) |
Diameter of
thread (mm) |
Up and Down moving
distance of the head
(mm) |
Distance between
the main spindle
and the table
(mm) |
Working table
size(mm) |
| 45 |
JT-2
CT-12 |
 2~8
Less than(10) |
260 |
350 |
225X230 |
| Motor |
Main spindle speed
(R.P.M.) |
Auto feeding thread
pitch for which
suits machine |
Max. capacity of
Multi-spindle |
Packing
dimension
(cm) |
G.Weight
(kg) |
| 50HZ |
60HZ |
Range
of TPI |
mm |
m/m
m/m standard
thread pitch |
3PH
4P
0.37KW
(1/2HP) |
1340
760
420 |
1600
900
500 |
64,56,48,
44,40,32,
28,24,20,
18,16 |
0.2,0.25,0.3
0.35,0.4,0.45
0.5,0.6,0.7
0.75,0.8,0.9
1.0,1.25
(1.5) (1.75) |
3X10 spindles
4X5 spindles
5X2 spindles |
73 X 52 X 82
(L)X(W)X(H) |
145 |
|
|
